REGULATORY INTELLIGENCE/Last updated Q4 2026

Non-Chinese Drone Motor Manufacturers: What the Rules Require and Who Markets Compliant Motors

Three separate rules govern drone motors, and none of them is "not Chinese". The FCC Covered List turns on where a motor is produced, NDAA section 848 does not name motors, and a separate statute covers the magnets inside them.

OVERVIEW

A drone motor has to clear different tests depending on who is buying and what the drone is. For new FCC equipment authorisations involving UAS and UAS critical components, production country is one Covered List test, and separate restrictions apply to named producers and their logic-bearing hardware components. For Department of Defense purchases, the test is whether a covered drone uses components from China, Russia, Iran or North Korea, and a separate statute applies to the magnets inside the motor.

On 22 December 2025 the FCC's Public Safety and Homeland Security Bureau added drones and "UAS critical components" produced in foreign countries to the Covered List (DA 25-1086). The National Security Determination behind that notice defines critical components as including, but not limited to, eight groups of parts: among them data transmission devices, flight controllers, navigation systems, batteries and motors. The wording is "produced in a foreign country", not "produced in China". A motor made in an allied country is therefore inside the listing unless an exemption applies. Among the exemptions on the Covered List as of 23 October 2026 are items on the Blue UAS Cleared List and items that qualify as domestic end products under the Buy American standard, both until 1 January 2028, and devices granted a Conditional Approval by the Department of War or Homeland Security.

The Department of Defense rule is narrower in one respect and wider in another. Section 848 of the FY2020 NDAA, as amended, bars the Secretary of Defense from operating or contracting for a covered drone that is made in, or by an entity domiciled in, China, Russia, Iran or North Korea, or that uses flight controllers, radios, data transmission devices, cameras or gimbals made there. Motors are not in that list. The wider rule is 10 U.S.C. 4872, which bars Defense Department procurement of samarium-cobalt and neodymium-iron-boron magnets melted or produced in those countries, and of end items containing such magnets manufactured there, at any tier of contract, subject to listed exceptions. On this page's reading, that makes magnet origin a separate question from where the motor is assembled.

The table below lists US-based motor and propulsion suppliers, their product claims, and the production-location disclosures or gaps in the cited sources. It is not an approved-supplier list.

Updated 18 November 2026: Page published.

AT A GLANCE

FCC listing of foreign-produced UAS critical components, including motors
22 December 2025 (DA 25-1086)
Blue UAS and Buy American exemptions
Until 1 January 2028 (per DA 26-1154, 23 October 2026)
Covered countries in NDAA s.848 and 10 U.S.C. 4872
China, Russia, Iran, North Korea
Magnets covered by 10 U.S.C. 4872
Samarium-cobalt and neodymium-iron-boron
American Security Drone Act sections 1823-1825
Cease to have effect five years after the 22 December 2023 enactment

WHY MOTORS ARE NOW A COMPLIANCE ITEM

The FCC's Covered List works on new equipment authorisations. The December 2025 fact sheet says covered equipment is prohibited from getting FCC equipment authorisation, that most wireless devices need authorisation before importation, marketing or sale in the US, and that the action does not affect previously authorised models or drones already bought. The Covered List entry reads "Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country", and the notice states that the National Security Determination's definitions apply to the entry.

The Covered List's exemptions were extended on 21 July 2026. Per DA 26-1154 (23 October 2026), the Department of War determined that Blue UAS Cleared List items and Buy American domestic end products stay exempt until 1 January 2028, and that Conditional Approvals for foreign-produced UAS and critical components do not terminate on 31 December 2026 so long as the applicant complies with its approved onshoring plan and updated vetting. A Conditional Approval ends, and the device returns to the Covered List, if the applicant fails to adhere to the plan or the US Government finds false statements in the application.

A separate FCC rule, in force from 13 October 2026, reaches drones that contain logic-bearing parts from DJI or Autel. It is covered in the Drone Intelligence briefing on the FCC component rule and is a different test from the production-country listing above. China's Announcement No. 49, which introduces export licensing for qualifying high-power brushless motors from 18 November 2026 according to that briefing, has its own Drone Intelligence briefing.

WHAT NDAA SECTION 848 AND THE FOLLOW-ON LAWS SAY ABOUT MOTORS

Section 848 of the FY2020 NDAA (Public Law 116-92), as amended by section 817 of the FY2023 NDAA, applies to the Secretary of Defense. It bars operating or contracting for a covered unmanned aircraft system that is manufactured in a covered foreign country or by an entity domiciled there, or that uses flight controllers, radios, data transmission devices, cameras or gimbals manufactured there or by an entity domiciled there. A covered foreign country is China, Russia, Iran or North Korea. The text of section 848(a) as published in 10 U.S.C. 4871 note does not name motors or propulsion. The omission of motors from that list does not establish a motor exemption: section 848 also defines a covered unmanned aircraft system to include related services and equipment. This page does not determine how that definition applies to a standalone motor.

The American Security Drone Act (FY2024 NDAA, Public Law 118-31, Subtitle B of Title XVIII, enacted 22 December 2023) is entity-based. Subject to statutory exemptions and waivers, section 1823 bars an executive agency from procuring a covered unmanned aircraft system manufactured or assembled by a covered foreign entity, including associated elements related to the collection and transmission of sensitive information, described as communication links and the components that control the unmanned aircraft. Section 1824 bars operation from 22 December 2025, subject to statutory exemptions and waivers, and section 1833 provides that sections 1823, 1824 and 1825 cease to have effect five years after enactment. Section 1822 defines a covered foreign entity by reference to a list kept by the Federal Acquisition Security Council, which includes entities domiciled in or controlled by the People's Republic of China.

Section 162 of the FY2025 NDAA (Public Law 118-159) directs the Secretary of Defense to disassemble a drone made by Da Jiang Innovations or a similar commercially available small drone made in a covered foreign country, build a component taxonomy and supply chain risk framework, and develop a strategy for a secure domestic and allied supply chain, including alternative suppliers and manufacturing capacity. Section 1709 of the same Act is the basis for the FCC's listing of DJI and Autel equipment. This page found no text in section 162 that names motors.

10 U.S.C. 4872 defines "covered material" to include samarium-cobalt magnets and neodymium-iron-boron magnets, and "covered nation" as the same four countries named in section 848. It bars the Secretary of Defense from procuring covered material melted or produced in a covered nation, or an end item containing covered material manufactured in a covered nation, and applies to prime contracts and subcontracts at any tier. Its exceptions include a waiver for a specific end item, procurement outside the United States for contingency operations, and, with conditions, commercially available off-the-shelf items and neodymium-iron-boron magnets made from recycled material milled and sintered in the United States. Whether a particular motor falls inside an exception is a contracting question this page does not resolve.

Principal regulatory triggers; statutory exemptions, exceptions and waivers also apply
RuleApplies toWhat triggers itMotors named?
FCC Covered List, DA 25-1086 (22 December 2025)New FCC equipment authorisations for drones and critical componentsProduced in a foreign country, unless exemptYes, in the definition of UAS critical components
FY2020 NDAA s.848, as amendedDepartment of Defense operation and contractingMade in, or by an entity domiciled in, China, Russia, Iran or North Korea; listed componentsNo. Names flight controllers, radios, data transmission devices, cameras, gimbals
FY2024 NDAA ss.1823-1824 (American Security Drone Act)Federal executive agency procurement and operationManufactured or assembled by a covered foreign entityNo. Covers the system and associated communication and control elements
10 U.S.C. 4872Department of Defense procurement, any tierCovered magnets melted or produced in China, Russia, Iran or North KoreaNot motors, but SmCo and NdFeB magnets

STAY ON TOP OF THIS MARKET

Track Non-Chinese Drone Motor Manufacturers: What the Rules Require and Who Markets Compliant Motors with the weekly Signal Dossier.

One free weekly briefing on the signals that matter in the autonomous-systems sector: contract awards, capital flows, regulatory shifts, and what they change. Evaluating a specific company? A five-day, source-traced Decision Brief answers one decision question for £999.

US MOTOR AND PROPULSION SUPPLIERS: WHAT EACH STATES

The table lists suppliers that, on their own sites or in the press coverage cited, make or market brushless motors, speed controllers or propulsion modules for drones. Each row gives what the company says, in its own words where quoted, and the basis. A statement on a company website is a marketing claim, not a certification. Entries are not ranked and none is an endorsement. This page checked company sites and trade coverage only; it did not obtain compliance documents from any supplier.

Suppliers marketing motors, ESCs or propulsion for drones, as stated by the company or trade press (checked 18 November 2026)
CompanyWhat it marketsWhere, per sourceCompliance wording in sourceBasis
Unusual MachinesDrone motors; Rotor Riot Brave 55A ESCProducts page: "Full Line Of Drone Motors" and "All Built In The USA" on the same line. sUAS News: the ESC "is manufactured in the USA"sUAS News (January 2025): the Brave 55A ESC was added to the Blue UAS Framework. The products page carries a general NDAA-compliance claim above its motor section; it does not identify a motor-specific Blue UAS listingCompany products page; sUAS News
Vertiq (Philadelphia, PA)Integrated motor, ESC and control modules (23-06 to 81-17 sizes); propellersHome page: "Engineered and Built in the USA""Blue UAS Certified, NDAA-Compliant"; the page does not say which products carry which designationCompany home page
ePropelled (Laconia, NH)Sparrow Series brushless motors and AMC 6S40A ESC; Falcon Series iAPM1200 and iAPM600 motorsSparrow Series: "USA-made". The home page does not specify manufacturing sites for Falcon and Hercules products, though a 20 August 2025 company press release describes a Laconia, NH facility for motors and controllers; the site lists offices in Laconia NH, Coventry UK and Chennai IndiaHome page describes Sparrow Series as "NDAA-compliant"; no Blue UAS statement found on that pageCompany home page; company press release (20 August 2025)
Atlas Motion Systems (Southern California)Motors for drones and robots"We build in Southern California" (prototyping); "Volume production in the Philippines"A page heading reads "NDAA-Compliant Motors"; the page also refers to production "without adversarial supply-chain dependence"; no certification or document givenCompany site
Hoverfly Elements (Sanford, FL)Motors and ESCs built with Korea Robot Manufacturing (KRM); GPS modulesNo manufacturing site given for the motors or ESCs; DroneXL describes a Korean supply chainCompany says the motors are engineered for Phase 2 of the Drone Dominance Program framework, with an onshoring roadmap; says components are being routed through Blue UAS verification, which describes work in progressDroneXL, 4 July 2026 (company statements, not independently verified)
KDE DirectBrushless motors, ESCs, propellersHome page: "Designed in the USA". No production location stated on the page checkedNo NDAA or Blue UAS statement found on the home pageCompany home page

READING THE TABLE

Two rows illustrate why wording matters. KDE Direct says "Designed in the USA", which describes design, not where a motor is produced; the FCC listing turns on production. Atlas Motion Systems states Southern California prototyping and volume production in the Philippines. On the face of DA 25-1086, a motor produced outside the United States sits within the Covered List entry unless it is exempt. On this page's reading, the Philippines and South Korea are not among the four covered foreign countries in section 848, but the FCC entry says "a foreign country", so for the FCC the question is which exemption or approval applies, not whether the country is friendly.

Companies whose US production claims rest only on press coverage, with no company filing or primary source this page could open, are not in the table. This page makes no statement on any supplier's production volume: none of the sources above gives a verified monthly output, and a buyer who needs scale should request it in writing along with the compliance documents.

HOW TO SHORTLIST A MOTOR SUPPLIER (DRONE INTELLIGENCE READING)

This section is Drone Intelligence's reading of the rules above, not legal advice and not an official procedure.

1. Name the test first. For new FCC authorisation, check both the production-country listing and the producer-based component restrictions. A drone sold to the Department of Defense is tested on section 848 components and the magnet statute. A supplier can satisfy one and not the other.

2. Ask for the document, not the adjective. Relevant exemptions include a Blue UAS listing, Buy American domestic end product status, and a Conditional Approval subject to its terms. The FCC uses "Blue UAS Cleared List" to cover both the aircraft list and the components-and-software Framework. A separate exemption covers qualifying toy drones, including those with foreign-produced components. "NDAA-compliant" on a product page names none of them. Check any Blue UAS claim against the current list, which the Defense Contract Management Agency took over from the Defense Innovation Unit in December 2025.

3. Ask where the magnets come from. Under 10 U.S.C. 4872, SmCo and NdFeB magnets melted or produced in China, Russia, Iran or North Korea are covered material for Defense Department procurement. Ask for the magnet source and the country of each stage the supplier can document, including stator and winding steps.

4. Separate design from production. "Designed in", "engineered in" and "assembled in" are not "produced in". Ask for the production site's address.

5. Ask for production scale in writing: units per month today, committed capacity and lead times. This page found no verified output figure for any supplier in the table.

6. Check each item separately. A motor, an ESC and a propeller are different products. The determination's list of critical components includes motors and "is not limited to" the items named, and propellers are not named in it. A Blue UAS listing for one product does not extend to others from the same company.

KEY PLAYERS

Unusual Machines

Products page lists a "Full Line Of Drone Motors" and "All Built In The USA" on the same line; its Rotor Riot Brave 55A ESC was reported added to the Blue UAS Framework in January 2025.

Vertiq

Philadelphia, Pennsylvania. States "Engineered and Built in the USA" and "Blue UAS Certified, NDAA-Compliant" for its integrated motor, ESC and control modules.

ePropelled

Laconia, New Hampshire. Sparrow Series brushless motors and ESC described as "USA-made" and "NDAA-compliant".

Atlas Motion Systems

Builds in Southern California and states volume production in the Philippines; carries an "NDAA-Compliant Motors" heading.

Hoverfly

Sanford, Florida. Launched Hoverfly Elements motors and ESCs built with Korea Robot Manufacturing, per DroneXL (4 July 2026).

KDE Direct

Makes brushless motors, ESCs and propellers; states "Designed in the USA" without a production location on its home page.

DRONE INTELLIGENCE ASSESSMENT

Three dates shape sourcing decisions. The Blue UAS and Buy American exemptions run to 1 January 2028 under the Department of War's July 2026 determination. Conditional Approvals for foreign-produced UAS and critical components continue past 31 December 2026 subject to compliance with the approved onshoring plan and updated product vetting. And sections 1823 to 1825 of the American Security Drone Act cease to have effect five years after their December 2023 enactment, unless Congress acts. A Drone Intelligence assessment: the FCC production-country test, not the NDAA component list, is the rule that most directly reaches motors, and it favours suppliers that can show US production or a documented exemption. Magnet sourcing is the layer least visible on product pages and the one the statute for Defense procurement addresses directly.

TRACK Non-Chinese Drone Motor Manufacturers: What the Rules Require and Who Markets Compliant Motors

Contract awards, funding rounds and regulatory changes in this market, summarised once a week. Free, and no other emails.

FREQUENTLY ASKED QUESTIONS

Who are the non-Chinese drone motor manufacturers?

This page lists six US-based suppliers that market drone motors or propulsion modules: Unusual Machines, Vertiq, ePropelled, Atlas Motion Systems, Hoverfly Elements and KDE Direct, with what each says about where its products are made. "Non-Chinese" is not the FCC test, which asks where a motor was produced, so an allied-country motor is also inside the Covered List unless an exemption applies.

Are drone motors covered by the FCC Covered List?

Yes. The National Security Determination behind DA 25-1086 (22 December 2025) lists motors among UAS critical components produced in a foreign country, alongside other parts such as flight controllers and batteries. The list is described as including but not limited to those items. Exemptions cover Blue UAS Cleared List items and Buy American domestic end products until 1 January 2028, and devices with a Conditional Approval.

Does NDAA section 848 ban Chinese drone motors?

Not by name. Section 848 of the FY2020 NDAA, as amended, names specific components (flight controllers, radios, data transmission devices, cameras and gimbals) and the drone itself. Motors are not in that list. The magnets inside a motor are separately covered for Defense Department procurement by 10 U.S.C. 4872 when they are samarium-cobalt or neodymium-iron-boron magnets produced in China, Russia, Iran or North Korea.

What should a buyer look for in a non-Chinese drone motor supplier?

On this page's reading, three things: a recognised compliance route (Blue UAS Cleared List entry, Buy American domestic end product basis or an FCC Conditional Approval), a stated production site, and magnet sourcing outside China, Russia, Iran and North Korea for Defense Department work. A product-page label such as "NDAA-compliant" does not name any of these.

Which US drone motor makers belong on a shortlist?

This page does not rank suppliers. It lists six suppliers, with sources for their product claims and any production-location disclosures; some sources do not identify a production site. A shortlist should start from the compliance test the drone must pass, then request the supplier's documents, production address and magnet source for the specific motor.

Can US drone motor makers supply at production scale?

This page found no verified monthly output figure for any supplier in the table. Unusual Machines, Vertiq and ePropelled state US manufacture; Atlas Motion Systems states volume production in the Philippines. Capacity is a question to put to each supplier in writing, with lead times.

Who are the leading US drone motor makers for defence platforms?

This page does not rank suppliers and found no source that does. It lists Unusual Machines, Vertiq and ePropelled as suppliers stating US manufacture, with Atlas Motion Systems, Hoverfly Elements and KDE Direct also marketing drone motors. For Defense Department work, the tests are section 848, which does not name motors, and 10 U.S.C. 4872 on magnets.

Where can I find NDAA-compliant drone motors made in the US?

Start with the Blue UAS list, now run by the Defense Contract Management Agency, and with supplier documents. On their own sites, Unusual Machines ("All Built In The USA"), Vertiq ("Engineered and Built in the USA") and ePropelled (Sparrow Series "USA-made") state US manufacture. A site statement is not a certification.

Who makes custom non-Chinese motors for autonomous drones?

Of the companies on this page, Atlas Motion Systems says it designs systems around a customer's product requirement, and says it builds in Southern California with volume production in the Philippines. This page did not verify custom-motor capability for any other supplier. Confirm custom work, production site and magnet source in writing.

Which US drone motor supplier is the best value long term?

This page found no source comparing prices, lead times or supplier longevity, and makes no value judgement. For long-term sourcing, ask each supplier about the production site, the magnet source, whether a Blue UAS, Buy American or Conditional Approval route applies, and what happens to a Conditional Approval if an onshoring plan is not met.

Do the rules cover propellers as well as motors?

Motors are named in the FCC determination; propellers are not named, though the list is not limited to the items named. Vertiq lists propeller products and KDE Direct says it makes propellers. A Blue UAS listing or compliance statement for a motor does not automatically extend to a propeller from the same company.

Researching this market for a live decision? Commission a Decision Brief: an independent three-page read on any company in it, delivered in five working days.

ABOUT THIS PAGE

Prepared by
Drone Intelligence
Last verified
18 November 2026
Sources
16 sources, listed above
Status
Factual claims are attributed to the sources listed above. Where we give our own assessment, the text says so.
Corrections
Email editor@droneintelligence.ai with the page URL and the source you believe contradicts the claim.

Prepared under the Drone Intelligence methodology. Editorial decisions follow our editorial policy. Independence and disclosure standards at ethics.

CITE AS

“Non-Chinese Drone Motor Manufacturers: What the Rules Require and Who Markets Compliant Motors” Drone Intelligence, 18 November 2026. https://droneintelligence.ai/intelligence/non-chinese-drone-motor-suppliers

Drone Intelligence, Market Intelligence. Updated Q4 2026.

info@droneintelligence.ai

Decision BriefOne company, five days, £999
Commission